?e?e ?e ?e ?e ?e ?e ?e ?e ?e ?e ?e universal ac input / full range no load power consumption <0.3w compact size erp step2 compliant 2 pole euro plug class power (without earth pin) protections: short circuit / overload / over voltage / over temperature pass lps 100% full load burn-in test fully enclosed plastic case low cost, high reliability 2 years warranty ii specification model no. dc voltage note.2 rated current current range rated power ripple & noise (max.) note.3 output setup, rise, hold up time voltage range frequency range efficiency (typ.) note.7 ac current input environment inrush current (max.) leakage current(max.) safety standards safety & emc (note. 8) working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing protection 5v GS05E-USB 1.00a 0 ~ 1.00a 5w 80mvp-p voltage tolerance note.4 line regulation note.5 load regulation note.6 ? 4.0% ? 4.0% ? 1.0% 300ms, 20ms, 50ms at full load 90 ~ 264vac 127 ~ 370vdc 47 ~ 63hz 71% 0.15a / 100vac 30a / 230vac 0.25ma / 240vac tuv en60950-1 approved withstand voltage isolation resistance i/p-o/p:4242vdc i/p-o/p:100m ohms / 500vdc / 25 / 70% rh j 1100khrs min. mil-hdbk-217f(25 ) j -20 ~ +50 (refer to "derating curve") j 20% ~ 90% rh non-condensing -20 ~ +85 , 10 ~ 95% rh j ? j j 0.03% / (0 ~ 50 ) 10 ~ 500hz, 2g 10min./1cycle, period for 60min. each along x, y, z axes 41.54*30.5*20mm (l*w*h) 60g dc output connector usb type a 1.all parameters are specified at 230vac input, rated load, 25 70% rh ambi ent. 2.dc voltage: the output voltage set at point measure by plug terminal & 50% lo ad. 3.ripple & noise are measured at 20mhz by using a 12" twisted pair terminated w ith a 0.1uf & 47uf capacitor. 4.tolerance: includes set up tolerance, line regulation, load regul ation. 5.line regulation is measured from low line to high line at rated load. 6.load regulation is measured from 0% to 100% rated load 7.efficiency is measured at 230vac. 8.the power supply is considered as an independent unit, but the final equi pment still need to re-confirm that the whole system complies with the emc directives. j ?? features : compliance to en55022 class b, en61000-3-2,3 overload over voltage 105 ~ 135% rated output voltage power protection type : hiccup mode, recovers automatically after fault con dition is removed protection type : hiccup mode, recovers automatically after fault con dition is removed 105 ~ 200% rated output voltage, detect on main control ic 5w ac-dc single output wall-mounted type g s 0 5 e - u s b u1 tj 142 typically (u1) detect on main control ic j protection type : shut down o/p voltage, recovers automatically after t emperature goes down over temperature file name:GS05E-USB-spec 2012-10-01 compliance to en61000-4-2,3,4,5,6,8,11, light industry level, c riteria a emc immunity emc emission
mechanical specification derating curve file name:GS05E-USB-spec 2012-10-01 unit:mm - + usb type a 18.07 30.5 18.2 20 30.5 41.54 14 ta ( ) j load (%) -20 10 20 30 50 40 60 100 static characteristics 5w ac-dc single output wall-mounted type g s 0 5 e - u s b input voltage (vac) 60hz 90 100 95 120 110 160 140 200 180 240 220 264 load (%) 90 100 80 70 60 50 40 12 3 4 -v n.c n.c +v
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: mean well: ? GS05E-USB
|